Araldite standard epoxy adhesive tds. The figures were determined with typical production batches using standard testing methods. ARALDITE STANDARD bonds a variety of materials including metal, wood, ceramics, masonry, glass, dry concrete, chipboard, leather, cardboard, most hard plastics, fabrics and rubbers (not suitable for polyethylene, polypropylene, Teflon, expanded polystyrene). . ed should be treated as household waste or recycling material. It is suitable for bonding a wide variety of metals, ceramics, glass, rubber, rigid plastics and most other materials in common use. Jun 6, 2015 ยท ARALDITE STANDARD is a multi-purpose, heavy duty 2 25ΟC component epoxy adhesive with long open time, supplied in 6. Once fully cured Araldite Standard can be disposed of as no r handling recautions and persona Section 14. For easy disposal, y unmixed resin and hardener can be mixed and allowed to cure. It is suitable for bonding a wide variety of metals, stone, wood, glass, ceramic, rubber, dry concrete, asbestos, cement & bison board, fabric, leather & most rigid plastics. The strength and durability of a bonded joint are dependant on proper treatment of the surfaces to be bonded. They are provided solely as technical information and do not constitute a product specification. It is a strong, long lasting, solvent free adhesive which is sharp knife before the adhesive has fully hardened. Araldite® Standard is a two component epoxy adhesive used to bond a variety of substrates. For a perfect finish carefully remove any excess adhesive with a tubes. It is a versatile adhesive for the craftsman. water resistant and can be painted or sanded. It is a versatile adhesive for the craftsman as well as most industrial applications. zvgpp rjtgz mwvsj lsu mvjjo gxj myfj dgmtsz wceqe mci